B-510Ld1 / B-510Ld2 - Optika Italy B-510 Serie Manual De Instrucciones

8. Insert the lamp housing cable into the fluorescent
power supply, aligning the notches on the
connectors. (Fig. 22)
9. Insert the power cord into the socket ①. (Fig. 23)
Before connecting the power cord, se-
cure the lamp housing cable the the
power supply.
If the power cord is connected before,
there may be a risk of electrical shock.

7.7.4 B-510LD1 / B-510LD2

1. Insert the round dovetail socket of the illuminator
① into the hole in the microscope body and
tighten the locking screw ②. (Fig 24).
2. Connect the LED illuminator plug into the
microscope body ③. (Fig. 25)
①
③
Page 25
Fig. 22
Fig. 23
①
②
Fig. 24
Fig. 25