Haier GWT950AW Manual Del Usuario página 18

4. Water Level
• A fter Wash Cycle Selection, Press the water level button to Select the proper
water level for wash.
5. Speed Wash/Spin
• Once the power is switched on the machine will automatically set to Normal/
Fast. Press button to change selection.
6. Soil Level
• W hen the washer is powered on, the machine will automatically set at Heavy
Duty. Select different soil levels by pressing this button.
7. Temperature Wash/Rinse
• I nitial setting is Warm/Cold when washer is powered on. Press this button to
change selection based on clothes put in the washer.
8. Cycle Signal
• This is set at Low when washer is started. Press button to adjust.
9. Delay Start
• To start the washer at a later time press the Delay Start button and set the time.
• When activated the indicator displays 2. Push button once for every 1 hour
delay for up to 24 hours.
• Press start button to activate Delay Start.
• When the delay timer starts the program select indicator turns off. The indicator
will display the remaining time to turn on the unit. In the lower right corner of
the display, a blinking light will indicate that Delay Start has been activated.
• By pressing the Delay/Start button the selected Process programs will be
displayed. By altering the running program, the washer will have to be reset.
10. Start/Pause
• P ress this button when you want the machine to start.
• D uring operation, press this button to pause and press it again to resume
operation.
NOTE: O pening the top lid will stop the machine except during water filling or
draining.
NOTE: Total time may be affected by water inlet and drain time. It may also be
affected by the water pressure. Heavy Duty and White programs
could combine the process of Pre-wash during which the washing
machine first Pre-wash for about 20-30 minutes, with slight pulsation after
water filling and then begins to wash.
English
17