Tabla de contenido
Idiomas disponibles
Idiomas disponibles
SETTING UP YOUR HUMIDIFIER
Your humidifier is made up of these parts:
HEV312
2 2
WATER TANK
SEAL PAD
TANK CAP
FILTER
FILTER HOLDING BASKET
MAIN
HOUSING
SETTING UP YOUR HUMIDIFIER (CONT'D)
Placement
Step 1
Soak Filter
Step 1
Remove the water tank
and carefully set aside.
Fill Tank
Step 1
Turn tank upside-down.
Remove tank cap by
turning counter-
clockwise
.
Power
Step 1
Select a firm, level location at least 6" (15cm) from
any walls for proper airflow. Place the humidifier on a
water-resistant surface, as water can damage furniture
and some flooring.
Kaz USA, Inc. will not accept responsibility for property
damage caused by water spillage.
Step 2
Step 3
Remove the filter from
Place wet filter back in
the holding basket.
the filter holding basket
and place back in unit.
Soak the filter in cool water.
DO NOT squeeze filter.
Step 2
Step 3
Fill tank with cool
Once the filled water
tap water.
tank has been placed
on the unit do not move
Replace tank cap. Tighten
humidifier. Doing so
by turning clockwise
.
could cause leakage
Place tank back on
and spills.
humidifier.
With the power switch in the OFF position, plug the filled
humidifier into a polarized 120V outlet. DO NOT FORCE
THE POLARIZED PLUG INTO THE OUTLET; it will only fit
one way.
DO NOT plug in humidifier with wet hands to avoid
electric shock.
3 3
Tabla de contenido
