Parts Identification; How To Use - Panasonic EW1611 Instrucciones De Funcionamiento

Parts identification

A
Handle
1 Stop/Jet switch
2 Jet mode
3 Stop
4 Nozzle release button
5 Nozzle
B Main body
6 Cord
7 Power plug
8 Suction hose
C Water tank
9 Upper water level limit
 Water tank cap
D Operation panel
 Water pressure
level LED indicator
(1~10 levels)
PB014248 - EW1611W503 _(01EN)_01-20-17.indd 11
 Power switch
 Water pressure
regulator switch
E Nozzle (x2)
• The nozzle is a
consumable.
 I dentification ring
(white & blue)
Accessory
F Nozzle stand
There may be moisture inside
the main unit (water tank
and suction hose) left from
the distilled water used for
product testing.

How to use

On sink or shelf
1 Place the main unit on a flat and stable
surface.
2 Plug in the power plug.
• Convenient dual power cord
outlet able to pull out the
cord, both right and left.
1. Open the water tank cap, remove
the water tank, and fill it with water.
• Always use new tap water or lukewarm
water.
• If the water feels cold, use lukewarm
water with a temperature of 40 °C or less.
• When filling water, be sure not to exceed
the upper water level limit.
2. Set the tank to the main unit firmly,
and attach the water tank cap.
3. Insert the nozzle firmly into the
handle. Make sure fixed firmly.
Upper water
level limit
11
2017/1/20 14:59:24