Troubleshooting - Panasonic EW1611 Instrucciones De Funcionamiento

6. Clean the handle, and put it back
into the storage slot.
When cleaning the nozzle and handle
• Do not use lukewarm water exceeding 50 °C.
• Use neutral kitchen detergent and rinse well with water to
ensure no detergent remains after cleaning.
• Wipe away the water with a towel or the like, keep the
product in the dry place.
• The nozzle cannot be cleaned in a dish washer.
When wiping stains away on the main unit
with a cloth
• Never use thinners, benzine, or alcohol.
(Doing so may cause malfunction, cracking
or discoloration of the parts.)
• Do not wash the main body with water.
14
PB014248 - EW1611W503 _(01EN)_01-20-17.indd 14

Troubleshooting

Problem Possible cause
The nozzle is
No water comes out,
clogged.
or water jet power
The outlet of nozzle
down.
is squashed.
The nozzle comes off The nozzle is
during use. deformed.
Motor sound changes
after the Stop/Jet
This is not an abnormality.
switch is set to " "
(Stop).
Takes 10 minutes
after switch on.
Water jet stops during
using.
The self-protection
function is
activated due to a
thunderstorm etc.
The water pressure
This is not an abnormality.
level LED indicator still
The indicator will be off after
flashes after the power
1 minute of turning off.
switch is turned off.
If the problems still cannot be solved, contact the store where
you purchased the unit or a service centre authorized by
Panasonic for repair.
Action
Replace the
nozzle.
This is not an
abnormality.
(See page
12.)
Turn on the
power switch
again.
2017/1/20 14:59:27