FPZ MS Serie Manual De Instrucciones página 32

Heavy loads overturning or falling may cause crushing with consequent injury to the person and even death! Position packing
material in a stable position.
Do not put loads on top of the packing.
Heavy loads overturning or falling may cause crushing with consequent injury to the person and even death !
Before starting handling operations (lifting, shifting, transport, deposit) read the mass (M) of the unit shown in the
"CHARACTERISTIC DATA" table and determine the most suitable handling method for working in conditions of maximum safety.
In this regard, all risk prevention measures must be taken, including any local instructions and/or details necessary for carrying
out these operations safely:
• carried out by qualified personnel with specific skills who have been suitably informed;
•
carried out with the help of suitable equipment;
• the work is to be organised so that it poses the smallest risk possible and is done under safe, healthy conditions;
• with safe, stable support surfaces;
• using suitable work clothing and personal protection equipment (gloves, goggles, safety footwear and helmet);
• work area with sufficient space, level floors, no obstructions;
• avoid impacts, jolts, and shaking.
Units weighing more than 25 kg are provided with hoisting bolts for handling.
Different types of packing are used depending on the dimensions and weight. When the box is in the installation area, open the packing,
remove the documents and then take the blower out, as shown below.
ENERGOEKONOM spol. s r.o., Wolkerova 433, CZ-250 82 Úvaly, Czech Republic, Tel.: +420 281 981 055, [email protected], www.energoekonom.cz
Danger due to loads which overturn or fall!
Danger due to lifting heavy loads!
32 / 96
WARNING !
It is severely prohibited to lift
the unit in ways other than
those intended. Use the
eyelets bolts located on the
body of the blower, or the
motor or the base