Incorrect And Reasonably Foreseeable Use; Storage And Transport - FPZ MS Serie Manual De Instrucciones

service conditions makes them capable of carrying out all the works necessary, while being aware of and avoiding any
possible danger and/or damage.
IT IS COMPULSORY TO:
- Check and comply with the intended use of the machine
- Check and comply with the conditions of use listed in this manual
- Comply with the installation requirements specified in this manual
- Carry out preliminary checks as indicated in the chapter entitled "PUTTING INTO OPERATION".
- Carry out the necessary maintenance as indicated in chapter 6.
8.3

INCORRECT AND REASONABLY FORESEEABLE USE

Failure to comply with the prohibitions and obligations may lead to technical breakdowns, damage to the plant and injury.
Risk of extremely serious injury!
Some of the incorrect uses identified by risk analysis and practical experience are listed below and subdivided on the basis of the
conditions that can produce them.
INCORRECT USE
INCORRECT USES CONNECTED WITH NORMAL OPERATION
Failure to respect the distance for the air
intake of the motor.
Presence of workers and possible contact
with the blower.
Use of loose fitting clothing or long hair not
tied back.
INCORRECT USES CONNECTED WITH THE METHOD OF USE
Failure to install the sensors required
without equivalent protection systems
Failure to comply
requirements (par. 1.2):
- ambient temperatures
outside the limits or incorrect
- Altitude higher than 1,000 m.
- Failure to consider the filter and plant
load loss
Failure to install the filter (for use with
suction in the ambient environment)
Operation outside the curve (P/Q)
Rigid connection between the machine
and the plant
INCORRECT USES CONNECTED WITH MAINTENANCE WORK
Failure to clean the filter
Failure to remove layers of surface dust
BREAKDOWN AND EMERGENCY CONDITIONS
Failure to stop the machine if it is making
unusual noises.
Failure to stop the machine if it is leaking
from the seals or gaskets.
Failure to stop the machine if there is no
oil in the seals.
9

STORAGE AND TRANSPORT

Store in a dry place. Keep the machine in the packing, if possible. Do not remove the protective covers of the openings.
ENERGOEKONOM spol. s r.o., Wolkerova 433, CZ-250 82 Úvaly, Czech Republic, Tel.: +420 281 981 055, [email protected], www.energoekonom.cz
Use which does not conform to intended use may cause serious injury and even death!
CONSEQUENCES
Overheating of the motor and possible
damage to the blower
Danger of the worker coming into contact
with hot parts of the machine
Possible sucking or entanglement in the
blower or the fan of the motor
Lack of control of the machine without
being able to stop it in the event of
malfunction or emergencies in general
with operating
Performance of the blower different than
data given, possible motor breakdown and
which are seizing of the impeller.
Entry of particles in the blower with seizure
of the impeller
Performance of the blower different than
data given, possible motor breakdown and
seizing of the impeller.
Unusual vibrations for the machine and/or
plant with possible seizure of the machine.
Seizure of the impeller.
Overheating of the machine.
Damage with possible seizure of the
impeller, overheating of the machine and
possible damage to the motor.
Formation of pockets of gas near the
machine
Overheating of the seals and the machine.
RISKS
RISK FOR THE MACHINE
RISK FOR THE WORKER
RISK FOR THE WORKER
RISK FOR THE MACHINE, PLANTS
AND WORKERS
RISK FOR THE MACHINE
RISK FOR THE MACHINE
RISK FOR THE MACHINE, PLANTS
AND WORKERS
RISK FOR THE MACHINE, PLANTS
AND WORKERS
RISK FOR THE MACHINE
RISK FOR THE MACHINE, PLANTS
AND WORKERS
RISK FOR THE MACHINE, PLANTS
AND WORKERS
RISK FOR THE MACHINE, PLANTS
AND WORKERS
RISK FOR THE MACHINE, PLANTS
AND WORKERS
31 / 96