MAINTENANCE
CARE AND MAINTENANCE
TESTING FOR PROPER WHEEL INSTALLATION
WARNING:
ALWAYS
check the double nut locking
system before each use to
ensure that the front wheel is
securely fastened to the frame.
• Lift the front wheel off of the ground and
22)
sharply strike the top of the tire (Fig. 22).
The wheel should not be loose or come off.
If you experience front wheel wobble
that is beyond what is normal for use
while walking or jogging you may have
to adjust the front wheel housing nut.
• Remove footrest to access nut by
23)
reversing step 24. You can use a
standard crescent wrench to tighten the
nut (Fig. 23).
DO NOT OVER TIGHTEN this can
cause damage to the wheel
FENDER
If adjustment or replacement is necessary:
• Line up the front fender and press onto the front
24)
frame assembly (Fig. 24a).
• Insert the 4 screws through the underside of
the front frame assembly into the front fender's
plastic tubes. Tighten the screws only until
snug (Fig. 24b).
DO NOT OVER TIGHTEN.
SEAT PAD
• To clean the seat pad, use only mild household
soap or detergent and warm water on a sponge
or clean cloth.
OTHER
• Check your stroller for loose screws, worn
parts, torn material or stitching on a regular
basis. Replace or repair parts as needed.
15
Copyright © 2016, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Fig. 22
Fig. 23
housing.
Fig. 24a
Fig. 24b
Verifique que tenga todas las piezas para este modelo
antes de montar el carrito.
Carrito
Tuerca del Eje
Bandeja para niños
Placa de retención
*Rueda delantera
**Sillita para el automóvil
*Los estilos de las ruedas pueden variar
**Por favor, consulte el manual ubicado debajo de la sillita para el
automóvil para conocer el tipo de base y las instrucciones.
Copyright © 2017, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
PIEZAS
Bandeja para padres
*Ruedas traseras
**Base
16