Parts Replacement - Felisatti TP115/300 Instrucciones De Servicio

Ocultar thumbs

Contenido

página de 25

/ 25
Contenido
Tabla de contenido

Tabla de contenido

Idiomas disponibles

1.1 CONSTANT ELECTRONIC CONTROL

The TPF115/350VE machines is equipped with an electronic

circuit that maintains constant motor revolutions in all working

situations, guaranteeing optimal working conditions.

1.2 APPLICATIONS

As a result of the r.p.m. and constant electronic control

mechanisms, the TPF115/350VE is particularly suitable for

metal filler sanding and vehicle bodywork.

1.3 USE AND APPLICATION

The tool is supplied ready for use it is only necessary to insert

the abrasive paper onto the pad.

Pre-punched abrasive paper, or normal paper to be punched

with the paper punch supplied, can be applied (for the AS

models with shavings extraction). In order to fix the abrasive

paper, proceed as follows (fig. 2-3):

1) Open one fixing clamp and insert the sheet of abrasive

paper into the exact position.

2) Position the sheet of abrasive paper on the base of the

tool.

3) Open the second clamp and insert the other edge of the

sheet of abrasive paper.

Check that the sheet is firmly secured and that it completely

covers the base of the tool.completely covers the base of

the tool.

Attention!

Excessive pressure on the handgrip does not necessarily

result in higher sanding speed, on the contrary, it can

provoke motor overloading and less efficient operation.

1.4 ABRASIVE PAPER

Only use good quality abrasive paper as this will improve the

sanding efficiency and reduce working time.

Use coarse grade (40-60-80) sanding sheets for when large

quantities of material require to be removed.

For finishing operations use 150 to 320 grade sanding

sheets.

1.5 SHAVINGS SUCTION UNITS (FIG. 2-3)

Felisatti AS22 and AS35/E dust suction units have been

designed to keep working areas clean and free from dust.

The AS35/E model is remote-controlled by means of the

switch on the electric power tool, that can be connected by

simply inserting the plug into the socket located on the dust

suction unit, thus avoiding wasting time and energy.

Always remember to empty the dus suction bag, it could fill

up and in that way make working operations less efficient.

Felisatti suction units can also be used for these tools.

1.6 IMPROPER USE

The functions and use of this tool are those exclusively

indicated in this manual.

ANY OTHER USE OF THE TOOL IS EXPLICITLY

FORBIDDEN !

1.7

ATTENTION!

Contact with or inhalation of the processing dust may

be dangerous for the operator and for anyone who is in

the vicinity.

Particular care must be taken when smoothing wood or

surfaces painted with lead paint due to the dangerous dust

produced. It is recommended to use safety goggles

and anti-dust masks.

MAINTENANCE

Regular inspection reduces the necessity for maintenance

operations and will keep your tool in good working condition.

The tool bearings are life-long lubricated. The motor must

be correctly ventilated during tool operation. For this reason

avoid blocking the air inlets with hands. After use, disconnect

the tool from the power supply and clean carefully.

7.1 DISPOSAL

At the end of the machine's working life, or when it can no

longer be repaired, ensure that it is disposed of according

to the standard regulations of the country in which it is

being used, and that the disposal operation is carried out by

specialized personnel following authorized guidelines.

In all circumstances:

- Do not abandon in the environment;

- Do not dispose of together with solid urban waste

products;

- Contact the special recycling centers.