Using Nitroset® Tool With A Nitroset® Pole - Nitroset NTS8X Manual Del Usuario

Operating Instructions
4.
Position the tool and push directly to feel the engagement of the firing
spring. Follow with a smooth and forceful motion to compress the firing
spring to trigger the firing mechanism. This is the correct fastening
procedure to minimize spalling and noise.
IMPORTANT: DO NOT BOUNCE FIRE THE TOOL!
5.
Reset the tool to ensure the muzzle barrel is clear of debris and repeat
Steps 1 to 4 for further use.
If the tool fails to fasten, remove the spent fastener assembly while pointing
the tool away from yourself and any bystanders.
Using NITROSET® Tool with a NITROSET® Pole
The use of NITROSET® pole is recommended for maximum e ciency on ceiling
fastening applications. The end of the wire assembly should be placed inside the
pole for better control. Actuate by following the actuating instructions as detailed.
When using an electrically conductive or metallic pole, be sure to maintain a
minimum 10 ft clearance from all electrical lines to avoid electrical hazard.
WARNING
W W W . N I T R O S E T . C O M
8