Dos And Don'ts; Dos - Nitroset NTS8X Manual Del Usuario

DOs and DON'Ts

9

DOs

DO read and understand the correct and safe usage instructions for the
NITROSET® Fastening System.
DO recognize that operator and bystander safety is the most important factor
when considering a NITROSET® tool application.
DO wear safety goggles and other suitable personal protective items while
using NITROSET® tool.
DO ensure all individuals working in the same area as those using the
NITROSET® system also are wearing proper safety equipment.
DO make sure when fastening into concrete, the base material thickness is at
least 3 times the shank penetration.
DO make sure when fastening into steel substrate, the minimum thickness of
the substrate must be 3/16".
DO use correct adapter for different types of pin and pin/clip assembly.
DO make sure that the tool is firmly flat to the surface before fastening.
DO reset the tool pointed away from yourself and any bystanders and eject any
debris from muzzle piece before inserting the fastener into the barrel.
DO remove defective tools, parts and/or accessories from service immediately.
DO only use the correct tools to disassemble the NITROSET® Tool. Use of pipe
wrenches or vise grips can damage the tool.
DO only use genuine NITROSET® repair parts. Any parts from di erent
manufacturers may impair function or cause damage to the tool and lead to
injury.
DO clean the tool daily and empty the debris cup every 500 fastenings or as
needed.
W W W . N I T R O S E T . C O M