Nitroset NTS8X Manual Del Usuario página 13

Troubleshooting Guide
III. The tool fires loudly.
A) Check if you are fastening to the appropriate substrate material.
B) Check if the correct adapter is being used.
C) Before firing, ensure the nosepiece is perpendicular to the material
surface. The tool is not designed to fasten properly at other angles.
D) Check and clean the debris cup. Ensure the vents in the debris cup are
clear of debris.
E) Ensure the debris cup and muzzle are securely fastened to the tool.
IV. The tool is di cult to depress and fire.
A) Ensure the tool is assembled properly according to the manual and
instructions.
B) Clean and lubricate according to the operator's manual.
C) Check that the springs are clean and straight.
V. Firing Pin Holder and Guide are damaged.
A) Disassemble the tool and check to see if the bu er is in place. This part
acts as a shock absorber. Damage to the tool is possible if used without
the bu er properly inserted.
B) Clean to the tool to ensure no debris has gotten into the main body of
the tool.
W W W . N I T R O S E T . C O M
12