Tool Assembly - Nitroset NTS8X Manual Del Usuario

Tool Assembly

15
Assemble Firing Pin into Firing Pin
Holder using the 1/8" Roll Pin.
Insert Trigger Ball Spring into Trigger
Ball Release and place into the Firing
Pin Holder.
Slide complete Firing Assembly into
the Guide while depressing the
Trigger Ball Release until it clicks into
2
the Guide.
Insert Guide and Holder through the
1
Reset Sleeve. Attach Reset Spring to
Reset Sleeve.
Insert Reset Sleeve into the Trigger
Body. Make sure the trigger key on
the body aligns properly with the
Trigger Ball Release.
Insert Main Assembly Pin. Ensure
coils of the Reset Sleeve are all above
the pin.
Slide Outer Cover Sleeve over the
Trigger Body.
Insert the Firing Spring with the Buffer
attached over the Holder.
Attach the End Cap of the tool.
Secure the Debris Cup to the Muzzle.
Slide appropriate Adapter onto the
Nosepiece.
Secure the complete Nosepiece
Assembly onto the Reset Sleeve.
W W W . N I T R O S E T . C O M