Operation - Silvercrest SAS 7.4 LI D3 Instrucciones De Uso

Ocultar thumbs Ver también para SAS 7.4 LI D3:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

Operation

CAUTION!
The suction opening must always be open and may not be blocked .
Blockages lead to overheating and damage to the motor .
The appliance is not protected against splashes . You should therefore only
vacuum liquid up until the dirt container q is filled to the MAX mark!
NOTICES
Make certain that the dust filter 0 is always inserted before using the
appliance .
1) Remove the handheld vacuum cleaner from the wall bracket 3 or, if you are
not using the wall bracket 3 remove the barrel plug 5 from the socket .
2) If required, place the appropriate nozzle in the suction opening:
the crevice nozzle 2, to clean narrow and difficult to reach locations .
the wet suction nozzle 1 to vacuum up liquids .
NOTE
After you have vacuumed up liquids, immediately clean the dirt container q .
Otherwise, bacteria or mould will build up inside! Ensure that the dust filter
bag 9 is completely dry before using the appliance again .
3) To switch the appliance on, slide the on/off switch 6 forwards . The charge
indicator lamp 7 lights up green .
4) When you have finished using the appliance, slide the on/off switch 6 to
the rear .
58 
GB │ MT
SAS 7.4 LI D3
Tabla de contenido
loading

Tabla de contenido