Declaration Of Conformity - Felisatti TP517/AS Instrucciones De Servicio

mixed with remainders of varnish, polyurethane or other
chemical materials and when the sanding debris is hot after
long periods of working.
When working with the machine, always hold it firmly with
both hands and provide for a secure stance. The power tool
is guided more secure with both hands.
Secure the workpiece. A workpiece clamped with clamping
devices or in a vice is held more secure than by hand.
Other safety information
Be sure the power supply is same as the voltage given on the
rating plate. The tool is fitted with a two-core cable and plug.
Remove the power plug from socket before carrying out any
adjustment or servicing.
Residual risks
Even when the power tool is used as prescribed
it is not possible to eliminate all residual risk factors. The
following hazards may arise in connection with the power
tool's construction and design:
- Damage to lungs if an effective dust mask is not worn.
- Damage to hearing if effective hearing protection is not
worn.
- Damages to health resulting from vibration emission if
the power tool is being used over longer period of time or not
adequately managed and properly maintained.
WARNING! This power tool produces an electromagnetic field
during operation. This field may under some circumstances
interfere with active or passive medical implants. To reduce
the risk of serious or fatal injury, we recommend persons with
medical implants to consult their physician and the medical
implant manufacturer before operating this machine.

DECLARATION OF CONFORMITY

Business name of the manufacturer:
INTERSKOL POWER TOOLS S.L.
Full address of the manufacturer Stra. de St. Joan
de les Abadesses, s/n 17500 RIPOLL (Girona)
SPAIN
Name and address of the person (established in the
Community) compiled the technical file:
Jordi Carbonell, Santiago López
Stra. de St. Joan de les Abadesses, s/n 17500
RIPOLL (Girona) SPAIN
Product name: Orbital sander
Commercial name: Orbital sander
Models: TP115/350VE; TP517/AS
Type: Electric power tools
Serial Number: see label of the tool.
Fulfils all the relevant provisions of Directives
2006/42/EEC,
2002/95/EEC and 2002/96/EEC.
We hereby declare, under our sole responsibility,
that the FELISATTI brand products described in
this manual TP115/350VE; TP517/AS comply with
the following standards or standard documents:
EN 60745-1:2009, EN 60745-2-4:2009, EN 55014-
1:2006+A1, EN 55014-2:1997+A1+A, EN 61000-3-
2:2006+A1, EN 61000-3-3:2008.
Jordi Carbonell
Dir. Fábrica
We reserve the right to make technical changes.
2006/95/EEC, 2004/108/EEC,
Santiago Lόpez
Dir. Marketing
5