Quick Install - Iomega iConnect Wireless Data Station Guía De Uso Rápido

1

Quick Install

NOTE: If you have purchased more than one Iomega iConnect, complete all steps on one before setting up
additional devices.
1. Use the included network cable to connect the Iomega iConnect to a network hub or switch.
NOTE: You must complete this step even if you plan to use the Iomega iConnect wirelessly. Wireless
configuration requires a wired connection. Once wireless is configured you can disconnect the network
cable. See Configuring Wireless Connections in this guide for more information.
2. Connect a USB storage device to an available USB port.
3. Connect the included power cord to the back of the Iomega iConnect and a power outlet. The Iomega
iConnect will power on automatically.
4. Start your computer, wait for the operating system to load, then insert the CD.
NOTE: For best results use a computer that is connected to the same router, hub, or switch as the Iomega
iConnect. If the software doesn't run automatically, double click on the CD icon, then double click the Setup
icon.
5. Install the Iomega Storage Manager software. Once the installation completes, the Storage Manager
software will launch automatically.
NOTE: Storage Manager will automatically scan your network when launched. If you receive a message from
Windows Firewall alerting you of network activity, click the Unblock button.
6. Once the Storage Manager software has found the Iomega iConnect, select your drive, then select Manage.
Follow the Device Setup Wizard to configure the Iomega iConnect.
Using Your Iomega iConnect Wireless Data Station
Configuring the Iomega iConnect
Click the Storage Manager
select Manage. The IomegaiConnect Console will open in a browser window. See the help system for more
information on configuration settings.
Configuring Wireless Connections
Configuring Wireless requires a wired network connection. Connect the Iomega iConnect using the instructions
above. Use Storage Manager to configure the Iomega iConnect. Navigate to the Network Settings configuration
page (Settings→Network Services→Network Settings). Click the
icon. Follow the onscreen instructions to configure your wireless connection. This configuration will require
information from your wireless router, including: SSID, security method, and password. If your router does not
automatically appear in the Select Network Drop-down menu, select Add Network and manually enter your
wireless network information. Once the configuration has been complete, unplug the network cable. See the
iConnect help system or HTML User's manual on the Solutions CD for step-by-step instructions.
2
2
icon in the System Tray (Windows) or Menu Bar (Mac). Select your drive, then
3
(Modify) button on next to the (Wireless)