Tabla de contenido
•
Do not drape cables over your b
•
If earth grounding of the work-piece is required, ground it directly with a
separate cable.
•
Do not touch electrode if you are in contact with the work, ground, or another
electrode from a different machine.
•
Use only well-maintained equipment. Repair or replace damaged parts at
once. Maintai
•
Wear a safety
•
Keep all pane
•
Clamp work c
worktable as near the weld as practical.
•
Insulate work clamp when not connected to work-piece to prevent contact
with any metal object.
•
Do not connect more than one electrode or work cable to any single weld
output terminal.
SIGNIFICANT DC VOLTAGE exists after removal of input power.
•
Turn Off inverter, disconnect input power, and discharge input capacitors
according to instructions in Maintenance Section before to
FUMES AND GASES can be hazardous.
•
Keep your head out of the fumes. Do not breathe the fumes.
•
If inside, ventilate the area and/or use exhaust at the arc to remove welding
fumes and gases.
•
If ventilation is poor, use an approved air-supplied respirator.
•
Read the Material Safety Data Sheets (MSDSs) and the manufactu
instructions for metals, consumables, coatings, cleaners, and degr
n unit according to manual.
harness if working above floor level.
ls and covers securely in place.
able with good metal-to-metal cont
Welding produces fumes and gases. Breathing these fumes
and gases can be hazardous to your health.
ody.
act to work-piece or
1‐3
uching any parts.
rer's
easers.
Tabla de contenido
Solución de problemas
