Smarter tools MIG-125 Manual De Instrucciones página 45

Tabla de contenido
A) Amp Adjustm
The Amp Adju
different amp settings.
Switch Settings
MAX-2
MAX-1
MIN-2
MIN-1
B) Over Heat Indicator
The welding power source is protected by a self resetting thermostat.
The indicator will illuminate if the duty cycle of the power source has
been exceeded. If the Over Heat light illuminates wait for the Over Heat
light to extinguish before re
C) Wire Feed Control
The wire feed speed i
clockwise or decreased by turning the Wire Feed Control knob
counterclockwise. The wire feed speed should be set according to the
specific application. Ref
information.
D) Power Switch
The Power Switch turns on and off the power supply to the welding
power source.
 
ent Switches
stment Switches allow for adjustment between four
suming welding.
s increased by turning the Wire Feed Control knob
er to the wire manufacture's lite
4‐2 
Welding Current in Volts
34V
28V
24V
21V
rature for further
Tabla de contenido

Solución de problemas

loading

Tabla de contenido