Programming Measures Using The "Self-Learning" Function - La Cimbali M26 Uso E Instalacion

Programming measures using the "SELF-LEARNING" function

The water doses for coffee and the hot water doses can
also be set using the "SELF-SETTING' function:
Coffee measures
coffee and insert it in the dispenser unit.
and press the button to be programed. Keep it pressed
until the desired level is reached in the cup or container.
During this phase, the setting for the volumetric dosage
pulses (top right of display
key is released, the setting reached is memorized and
appears under the programmed key.
3 - Starting from step 1, continue programing, as desired,
on all the coffee buttons.
(*)
(where present)
completed.
02_M26_UNICO_EU.indd 16
STOP
(*)
) is increased. When the
press and hold the START/STOP button for at least 8
seconds or until you hear a buzzer sound that will keep
sounding throughout the programing. The menu below will
(*)
appear on the display
SELF-LEARNING
Group 1
090 150
Hot water measures
1 - Press the button to be programed and keep it pressed
until the desired level is reached in the cup.
During this phase the time in seconds (top right of
(*)
display ) is increased; when the key is released, the
setting reached is memorized and appears below the
programmed key.
SELF-LEARNING
water button
2 - Starting from step 1, continue programing, as desired,
on all the water buttons.
16 EN
, showing the keys with the relative
DV: 000
STOP
080 160
t: 3.5
3.5
21/05/2018 11:06:47