Helpful Hints-Problems/Solutions - Sanyo AVM-3280G Manual Del Propietário

HELPFUL HINTS - PROBLEMS/SOLUTIONS
BEFORE REQUESTING SERVICE CHECK THE FOLLOWING CHART.
Problem:
TV turns off automatically.
No picture, poor picture.
Black box on screen.
No picture or same picture
in PIP (small) window.
Poor color or no color.
Blue Screen with Video1
or Video2 displayed.
No sound, poor sound.
No TV stereo sound.
No TV SAP sound.
No Cable channels
above number 13.
No UHF channels,
VHF OK.
18
Check these Conditions:
Check signal (Cable/Ant.)
connection.
Power surge protection feature.
Check antenna connections.
May be station trouble.
Brightness or Contrast misadjusted.
Possible interference from house-
hold appliance.
Caption Text Mode without display
information.
Check cable connection.
Check if VCR is turned ON.
Are two signals connected to the TV?
Check if program is in color.
Check antenna connections.
Color or Tint misadjusted.
May be station trouble.
Check Audio/ Video connections.
Check external equipment.
May be station trouble.
May be MUTE function.
Check Audio/ Video connections.
Check if station is broadcasting a
true MTS stereo signal.
Check if station is broadcasting a
SAP signal.
Cable Channel Indicator C should
appear next to channel number.
Cable Channel Indicator C should
not appear next to channel number.
(Continued on the next page.)
Try these Solutions:
Press POWER key.
The sleep timer may have been set.
Unplug TV momentarily.
Adjust antenna.
Try a different channel.
Press RESET key.
Press RESET key.
Switch OFF Captions (see page 11).
Try a different channel on your VCR.
Video jack cable must be connected
to VCR and TV.
Connect Ant./Cable and VCR/Satellite/
DVD, etc.
Try a different channel.
Adjust antenna.
Press RESET key.
Press VIDEO MODE key.
Switch on external equipment.
Try a different channel.
Adjust Volume.
Select Stereo from Audio on-screen
menu.
Select SAP from Audio on-screen
menu.
Select Cable from Antenna
on-screen menu; then start CH.
(channel) Search using the menu.
Select VHF/ UHF from Antenna
on-screen menu; then start CH.
(channel) Search using the menu.