Tabla de contenido
Idiomas disponibles
Idiomas disponibles
RESET TING THE TV
Press the RESET key to automatically reset the television to factory settings. These features will automatically reset:
•
Picture/Sound Adjustments: Color, Tint, Contrast, Brightness, Sharpness, Color Enhancer,
Bass, and Treble
•
Channel Memory
•
Audio to Stereo
•
Initial Channel
•
Caption to OFF
•
V-Guide to OFF
•
Language to English
•
Clock and Sleep Timer (if previously set)
If desired, personal settings can be made again
using the menu options.
CARE AND CLEANING
The surface of the cabinet can be damaged if not properly maintained. Many common household aerosol sprays,
cleaning agents, solvents and polishes will cause permanent damage to the fine surface.
1. Unplug the power cord before cleaning the television.
2. Clean the screen and cabinet with a soft dry cloth.
Note:
NEVER spray liquids on the screen because they can run
down and drip onto the chassis. This may cause component
failure not covered under Warranty.
HELPFUL HINTS - PROBLEMS/SOLUTIONS
BEFORE REQUESTING SERVICE CHECK THE FOLLOWING CHART.
Problem:
TV turns off automatically.
No picture, poor picture.
16
Check these Conditions:
Check signal (Cable/Ant.) connection.
Power surge protection feature.
Check antenna connections.
May be station trouble.
Brightness or Contrast misadjusted.
Possible interference from household
appliance.
Press RESET key
again to return
factory preset and
begin channel search
Try these Solutions:
Press POWER key.
Sleep Timer may have been set.
Unplug TV momentarily.
Adjust antenna.
Try a different channel.
Press RESET key.
(Continued on page 17.)
Capítulos
Tabla de contenido
