Operation And Functions; Setting Pushbutton; Blinking Codes - Resol FriWa Montaje/Conexiones/Manejo

FriWa
2. Operation and Function

2.1 Setting pushbutton

Operating control
lamp
(-) backward
2
SET / OK
(Selection / Adjustment mode)

2.2 Blinking codes

Main menu:
Meas. values
Reports
Balances
Settings
Options
Manual operation
User code
Expert
Settings:
back
Hotwater
BP on
BP off
BP wait
Circ.run
Circ.wait
Circ.sensor
Circ.hyst.
Circ.min
Week timer circ.
∆T-Rd on
∆T-Rd off.
Emergency
Time
Language
forward (+)
1
3
Meas. values:
back
T-HW
T-S
T-St
T-R
T-CW
T-C
Tap
Time
Load. pump
Circulation
Return valve
Relays 1-5
Sensors 1-9
Options:
back
Circulat.
Return div.
Error rel.
Signal rel.
Extern Off
Emergency
The controller is operated by three pushbuttons below the
display. Button 1 is for scrolling forwards through the menu
options or for increasing the adjustment values. Button 2
performs the opposite function.
Button 3 is for the adjustment of individual parameters.
By pressing button 3 you will get to the next submenu or
the SET-mode. It is also used for the confirmation of the
adjustments made.
In order to get to the main menu the backward button
has to be set to „back" and has to be confirmed with the
SET/OK button. If no button has been pressed for more
than 60 seconds, the controller is automatically set back to
the main menu.
Important notice: The selectable values and options are
function-dependant and will only appear on the display if they
are available for the adjusted start parameter and activated
via the operation code.
Operator code: Expert-Code 119
The expert menu is accessible after entering the operator
code, here the values can be changed.
Constantly green:
Blinking red/green:
Blinking green:
Blinking red:
Reports:
back
Everything OK
Initialization
!Sensor failure
>>Meas. values
!EEPROM
!RTC
-Manual operat.
-Circulation
-Emergency oper.
-Block. protect.
-External of
-Return divert.
-Hot water gen.
SW-Version
Manual operation
back
Relay 1-5
orderly operation
initilisation phase (10 sec.)
manual operation
sensor failure
Balances:
back
Operation
Volume
Vol. max
Load. -p.
Circ.-p.
T-S min
T-S max
T-CW mn
T-CW mx
Heat qty (Wh)
Heat qty (kWh)
Heat qty (MWh)
Expert:
back
BP time
Tap min.
Rot. min.
Default settings
Algorithm
21
|