Electric Supply - Resol FriWa Montaje/Conexiones/Manejo

FriWa
+

1.5 Electric supply

OK / Set
floating relay
2 (1)
~
250 V
P1 Discharge pump
Pc Circulation pump (optional)
T-HW Sensor hot water temperature
T-CW Sensor cold water temperature
T-S Sensor heat source temperature
dV Volume flow indicator
20
|
Nullleiter-Sammelklemme
benutzen!
N
Use Neutral Conductor
Collective Block
Schutzleiter-Sammelklemme
benutzen
Use PE Collective Block
T4A
L'
electro- semi-
mech. conductor
2 (1) 1 (1)
~ ~
250 V 250 V
T-S
P1
The electric supply of the controller has to be effected via
an external power switch (last workstep!) and the supply
voltage has to be 210 ... 250 Volt (50 ... 60 Hz). Flexible L N
conductors are either to be fixed with the enclosed strain-
relief clamps and the appropriate screws to the housing or
to be induced in a cable conduit into the housing of the
controller.
conductor L
neutral conductor N (collective terminal strip)
protective conductor PE (collective terminal strip)
T-HW
dV
Pc
T-CW
(T-C)