Tabla de contenido
Idiomas disponibles
Idiomas disponibles
POST-ASSEMBLY
GAS CONNECTION
FOR YOUR SAFETY:
Ensure that the black plastic grommets of the regulator provided are in place and that the hose
does not come into contact with the heat shield or the grill head.
Set the LP tank into the hole in the bottom shelf. Make sure the threaded connection at the top
points toward the rear of the grill as shown in Fig. 9. Secure the tank in place with the tank hold
chain as shown in Fig. 9.
Fig. 9
20
Capítulos
Tabla de contenido
