Festo DSMI B Serie Instrucciones De Utilizacion página 32

DSMI−...−B
For electronically closed−loop control of the DSMI in combination with a positio
ning controller:
Note
Special installation specifications apply to the electronically controlled
operation.
S To install the pneumatic system, please observe the instructions in the
descriptions of the positioning controller.
Connect the tubing of the DSMI with the
S
proportional directional control valve
according to the colour codes of the
connections.
Black release ring (looking at the stop
lever, it swivels in clockwise direction).
Blue release ring (looking at the stop
lever, it swivels in anticlockwise direc
tion).
The following applies to all other applications (e.g. as measuring cylinder):
Use one−way flow control valves GRLA
S
to set the swivel speed.
These are screwed directly into the com
pressed air ports (for this, remove the
standard connection with colour code).
Connect the DSMI tubing.
S
For eccentric masses:
Check whether controlled HGL non−return valves or a VZS compressed air
S
compensation reservoir are necessary.
In this way you can prevent the moving mass from moving down and hitting the
bottom if there is a sudden drop in pressure.
32
Fig. 17
Fig. 18
Festo DSMI−...−B 0806NH English