Festo DSMI B Serie Instrucciones De Utilizacion página 30

DSMI−...−B
3. Unscrew the locking screws aB for the
shock absorber retainers. To shift the
shock absorber retainers, it is sufficient to
slacken the locking screws until they can
just barely be shifted.
4. Push the shock absorber retainer towards
the stop lever until the adjustment sleeve
or the fixed stop of the shock absorber
(elastomer shock absorber or shock ab
sorber) touches the stop lever.
5. Retighten the locking screw aB of the
shock absorber retainer with the following
tightening torque.
Only with the specified tightening torque
will the gearing of the shock absorber
retainer grip the housing material.
DSMI−...−B
Tightening torque aB
Fig. 14
6. Repeat the adjustment for the other end position.
7. Press the cover cap of the DSMI back
on to the snap ring of the housing (if pre
sent).
The cover cap can also be snapped on to
freely positioned shock absorber retainers
if the elements are broken through at the
predetermined breaking point.
30
Fig. 11
Fig. 12
aB
Fig. 13
25
[Nm] 10
Fig. 15
Festo DSMI−...−B 0806NH English
40
39