Troubleshooting Mechanical And Electrical Problems; Optional Accessories; Replacement Parts - Powermatic 54A Manual De Operación Y Partes De La Canteadora De Paralelogramo

Troubleshooting Mechanical and Electrical Problems

Trouble
Machine will not
start/restart or
repeatedly trips
circuit breaker or
blows fuses.

Optional Accessories

2004017 ...........Dust Collector Adaptor
2042374 ...........Mobile Base
708801DX ........Knives (set of 3)
1791212 ...........Knife Inserts (set of 10)
6285991 ...........Tool Kit
Probable Cause
No incoming power.
Building circuit breaker trips
or fuse blows.
Switch or motor failure (how
to distinguish).
Motor overheated.
Motor failure.
Unit incorrectly wired.
On/off switch failure.
Remedy
Verify unit is connected to power, on-button is
pushed in completely, and stop-button is
disengaged.
Verify that jointer is on a circuit of correct size.
If circuit size is correct, there is probably a
loose electrical lead. Check amp setting on
motor starter.
If you have access to a voltmeter, you can
separate a switch failure from a motor failure
by first, verifying incoming voltage at
110/220+/-10% and second, checking the
voltage between switch and motor at
110/220+/-10%. If incoming voltage is
incorrect, you have a power supply problem. If
voltage between switch and motor is incorrect,
you have a switch problem. If voltage between
switch and motor is correct, you have a motor
problem.
Clean motor of dust or debris to allow proper
air circulation. Allow motor to cool down
before restarting.
If electric motor is suspect, you have two
options: Have a qualified electrician test the
motor for function or remove the motor and
take it to a qualified electric motor repair shop
and have it tested.
Double check to confirm all electrical
connections are correct. Refer to the Wiring
Diagram section to make any needed
corrections.
If the on/off switch is suspect, you have two
options: Have a qualified electrician test the
switch for function, or purchase a new on/off
switch and establish if that was the problem
on change out.

Replacement Parts

To order parts or reach our service department,
call 1-800-274-6848, Monday through Friday
(see our website
www.powermatic.com).
Number and Serial Number of your machine
available when you call will allow us to serve you
quickly and accurately.
29
for business hours;
Having the Model