Parts And Features - Kenmore 795.5183 Manual De Uso Y Cuidado

Problem
Doors will not close
correctly or pop
open.
Doors are diè cult to
open.
Refrigerator wobbles
or seems unstable.
Lights do not work.
Possible Causes
Food packages are blocking the door
open.
Ice bin, crisper cover, pans, shelves,
door bins, or baskets are out of
position.
The doors were removed during
product installation and not properly
replaced.
Refrigerator is not leveled properly.
The gaskets are dirty or sticky.
Door was recently closed.
Leveling legs are not adjusted
properly.
Floor is not level.
A light bulb has burned out.
NOTE: The refrigerator compartment
lamp is LED interior lighting, and
service should be performed by a
TXDOLo ed technician.

PARTS AND FEATURES

Rearrange food containers to clear the door and door
shelves.
Push bins all the way in and put crisper cover, pans,
shelves and baskets into their correct positions. See the
Using Your Refrigerator section for more information.
Remove and replace the doors according to the
Removing and Replacing Refrigerator Handles and
Doors section.
See Door Alignment in the Refrigeration Installation
section to level refrigerator.
Clean the gaskets and the surfaces that they touch.
Rub a thin coat of appliance polish or kitchen wax on
the gaskets after cleaning.
When you open the door, warmer air enters the
refrigerator. As the warm air cools, it can create a
vacuum. If the door is hard to open, wait one minute
to allow the air pressure to equalize, then see if it
opens more easily.
Refer to the Leveling and Door Alignment section.
It may be necessary to add shims under the leveling
legs or rollers to complete installation.
Refer to the Light Bulb Replacement section.
41
TROUBLESHOOTING GUIDE
Solutions