Advanced Programming - Pentair SFE Manual Del Usuario

S F E

5.2 Advanced programming

The module operating parameters are set in the advanced menu. Press
5 seconds to open this menu.
DATA DESCRIPTION
Regeneration start mode:
0 - Regeneration start at the time set during the enabled days.
1 - Regeneration start at the time set after the volume
treatment in the enabled days.
2 - Immediate start at the end of the volume treatment in the
enabled days.
3 - Start at intervals. Regeneration starts every 1-2-3-4-8-
12 hours. Regeneration starts when the hour strikes, so if
regeneration is enabled every two hours, it will be carried out
at 0:00, 2:00, 4:00 and so on. NOTE: the first regeneration is
carried out at the time set in the basic menu. This function is
available during the enabled days.
Press
Interval time between regenerations. Press
01
This parameter is displayed after the start up mode only if an
interval start has been selected (SH-03).
Prescale of the volumetric meter. Press
parameter is composed of the integer part and of the decimal
part, separated by the decimal point.
This parameter is displayed after the start up mode only if a
volume start has been selected (SH-01 or SH-02).
Volume to be treated (expressed in litres) before starting
the regeneration. Press
hundreds are modified first, once they are properly set, press
to switch to the tenths and units setting. This parameter
is displayed after the prescaler only if a volume start has been
selected (SH-01 or SH-02).
NOTE: See note 2 to calculate the volume of treatable water
between two subsequent regenerations.
Duration of the first regeneration cycle stop (minutes). Press
e
skipped and the system will directly go to the next stop.
Duration of the second regeneration cycle stop (minutes). Press
or
be skipped and the system will directly go to the next stop.
or to edit.
or to edit. Thousands and
to edit. If the parameter is set to off, the stop will be
to edit. If the parameter is set to off, the stop will
DEFAULT
0
1
or to edit.
14.0
or to edit. The
28000
5
30
31
and at the same time for
MIN - MAX
0-3
1-12
00 - 99.9
1000 - 9999
Of-99
Of-99
E
N
G
L
I
S
H