Mid-Initial Verification; Safety Instructions; Electromagnetic Interference; Care Instructions - Zenner MULTIDATA WR3 Manual De Instalacion Y Uso

Deutsch English
MID-Initial verification
Multidata WR3 is produced and
tested in compliance with the Eu-
ropean Measuring Instruments
Directive (MID). According to
this directive, devices are no lon-
ger carrying an initial verification
stamp, but rather the year of the
device's declaration of conformity
(recognizable on the front of the
device, for example: M16=2016).
The cold metrological part is
made by PTB K7.2 regulations
and calibrated. The MID controls
the use of heat meters up to the
moment they are placed on the
market resp. their first putting
into use. After this, the national
regulations for devices subject
to compulsory verification apply
within the EU. The duration of ini-
tial verification validity in Germany
remains 5 years for heat meters.
After this period has expired the
measuring device may no longer
be used for billing in commercial
use. The regulations resp. validity
period may vary in other countries
of the EU.
ZENNER International GmbH &
Co. KG declares that this product
with the number of the EC type
examination certificate DE-08-
MI004-PTB012 complies with the
requirements of the EC directives
2014/32/EU (Measuring instru-
20
Français
ments directive) and 89/336/ EEC
(electro-magnetic compatibility).
If you
please
[email protected]
The declaration
ty and the latest information
about this product can be ac-
cessed
www.zenner.com

Safety instructions

Electromagnetic interference

Multidata WR 3 fulfils the national
and international requirements for
interference resistance. To avoid
malfunctions due to other interfe-
rences, do not install fluorescent
lamps, switch cabinets or electric
devices such as motors or pumps
in the immediate vicinity of the
meter (minimum distance 1 m).
Cables leaving the meter should
not be laid parallel to live cables
(230V, minimum distance 0.2 m).

Care instructions

Clean plastic surfaces with a
damp cloth only. Do not use any
scouring or aggressive cleaning
agents! The device is mainte-
nance-free during the service life.
Repairs can only be made by the
manufacturer.
have questions,
direct them
of conformi-
or downloaded
to
from