Use - Nevadent NSLP 3.7 A1 Instrucciones De Uso

Use

This toothbrush has 5 different power levels:
–
"White": high speed, for especially thorough cleaning of the teeth; the
"White" LED
–
"Clean": normal speed, for daily cleaning, "Clean" LED
–
"Sensitive": slow speed, for people with sensitive teeth and gums, the
"Sensitive" LED
–
"Polish": highest speed, for polishing teeth, the "Polish" LED
NOTICE ON POLISHING
► To polish the teeth, add a little dental polishing paste to the brush head
Apply the brush head
do not start at the gums like during normal brushing.
Move the appliance in a circular motion up and down to polish the tooth.
Polish each tooth for approx. 20–30 seconds.
► It is normally sufficient to polish your teeth twice a week.
–
"Pulse": normal speed with short breaks, to massage the gums, the
"Pulse" LED
■ Press the On/Off button
LED
■ Press the On/Off button
order described. The respective operating LED and the "Accu" LED
up.
■ Press the On/Off button
switch off the toothbrush.
NOTE
If you operate one of the modes for longer than 10 seconds and then
press the On/Off button
Next time you switch it on, the toothbrush will automatically start in
the mode you were using last.
To change the mode again, press the On/Off button
until the appliance switches to the required mode as described above.
│ GB │ IE
■ 24
lights up
lights up
directly to the tooth. When polishing your teeth,
lights up.
once to activate the "White" mode. The "White"
and the "Accu" LED
once to switch up through various modes in the
again while the toothbrush is in "Pulse" mode to
, the toothbrush will switch off.
light up.
lights up.
lights up
.
light
repeatedly
NSLP 3.7 A1