How To Make Coffee - Hamilton Beach eclectrics 40110 Guía De Uso

840141700 ENv00.qxd

How to Make Coffee

1. To ensure best possible taste,
wash the carafe then clean the
inside of unit. See "Cleaning
Instructions."
2. Plug in Coffeemaker. The numbers
on Clock will flash until time is set.
3. Press H to set current hour with
AM or PM. Press M to set current
minutes. The clock is now set.
4. Fill carafe with the desired amount
of cold tap water. Flip open top
cover and pour water into reservoir.
5. Return the carafe with carafe lid
attached to the Keep-Hot Plate.
Make sure that the carafe is firmly
in place.
6. Place a disposable No. 4 cone-
shaped paper filter in filter basket.
A permanent filter may also be
used.
7. For each cup of coffee being
made, place one level scoop or
tablespoon of medium-ground
automatic drip coffee into filter.
Lower top cover to close.
8. Press ON/OFF button once to
brew coffee now and the light will
glow red. To brew later, see "To
Program Automatic Brew."
NOTE: To serve coffee during the
brewing cycle, remove carafe and
pour a cup. By removing the
carafe, the flow of coffee from
the bottom of the filter basket
will stop.
CAUTION
Burn Hazard
Return Carafe to Keep-Hot Plate
and ensure Auto Pause 'n Serve
is engaged within 20 seconds.
Hot water continues to flow into
the Filter Basket when the Auto
Pause 'n Serve feature is used.
Overflowing coffee and hot water
are a burn hazard.
9. The unit will shut off automatically
after two hours. When finished,
unplug from outlet.
10/25/05 9:55 AM Page 7
To Program Automatic Brew
NOTES:
• The Automatic Brew feature must
be programmed each time it is
used.
• Make sure you have placed the
desired amount of water and coffee
in the unit before using the
Automatic Brew feature.
1. Plug in Coffeemaker. The numbers
on the Clock will flash until the
time is set.
2. Press the H button until the current
hour is displayed. AM or PM will
appear on display. Press the M
button until the current minute is
displayed. The Clock is now set.
3. To program Coffeemaker to auto-
matically begin brewing, press and
hold the Prog/Auto button for two
seconds to enter the setting mode.
While still pressing Prog/Auto,
press the H button to set hours
and then press the M button to set
minutes until the desired brew time
is displayed.
4. To have Coffeemaker automatically
begin brewing at the preset time,
press Prog/Auto button momen-
tarily. The Prog/Auto button will
glow green to indicate Automatic
Brew is set and coffeemaker is
ready to begin brewing at the
specified time. "Auto" will appear
in the display.
5. The Coffeemaker will shut off two
hours after brewing begins.
7