Technical Data - Hilti NUN 054 IE-A22 Manual De Instrucciones Original

3.5 Items supplied
Crimping / pressing and cutting tool, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
3.6 Selecting the crimping / pressing die
A table to assist with selecting the type of crimping / pressing die to be used can be found at the end of
these operating instructions.
4

Technical data

Rated voltage
Weight in accordance with EPTA Procedure 01 including B22⁄8.0 battery
Crimping time
Max. crimping / pressing force
max. cutting capacity (outside diameter) (NCT J
CUAL cutting jaws)
max. cutting capacity (outside diameter) (NCT J
ACSR cutting jaws)
Max. permissible crimping capacity
Storage temperature
Ambient temperature for operation
4.1 Noise and vibration values in accordance with EN 60745
The sound pressure and vibration values given in these instructions were measured in accordance with a
standardized test and can be used to compare one power tool with another. They can also be used for a
preliminary assessment of exposure. The data given represents the main applications of the power tool.
However, if the power tool is used for different applications, with different accessory tools, or is poorly
maintained, the data can vary. This can significantly increase exposure over the total working period. An
accurate estimation of exposure should also take into account the times when the power tool is switched
off, or when it is running but not actually being used for a job. This can significantly reduce exposure over
the total working period. Identify additional safety measures to protect the operator from the effects of noise
and/or vibration, for example: maintaining the power tool and accessory tools, keeping the hands warm,
organization of work patterns.
Noise values
Sound (power) level (L
Uncertainty for the sound power level (K
Emission sound pressure level (L
Uncertainty for the sound pressure level (K
Vibration values
Total vibration (during operation) (a)
Uncertainty (K)
*2207120*
)
WA
)
WA
)
pA
)
pA
2207120
Cu cable
Al cable
Steel-reinforced Al ca-
ble
Steel rope / guy wire
(EHS)
Cu/Al standard con-
nector
Cu/Al fine-wire stan-
dard connector
80 dB(A)
2.5 dB(A)
70 dB(A)
2.5 dB(A)
2.5 m/s²
1.5 m/s²
NUN 054 IE-A22
21.6 V
2.6 kg
≈ 4 s
53 kN
33 mm
33 mm
20.5 mm
7 mm
240 mm²
185 mm²
−20 ℃ ... 70 ℃
−17 ℃ ... 60 ℃
English 17