Remedy Of Faults; Maintenance And Cleaning; Replacing The Bulb; Spare Parts - Oase LUNAQUA 3 LED Instrucciones De Uso

Remedy of faults

S
Malfunction
Lamp does not light up
Luminosity decreases
Water inside the spotlight housing
S

Maintenance and cleaning

W A R N I N G
Possible death or severe injury from hazardous electrical voltage!
• Prior to reaching into the water, isolate (switch off and disconnect) all units/devices used in the water.
• Isolate the device (disconnect from the power supply) before carrying out any work on it.
• Ensure that no moisture can enter the unit.
Cleaning the device
If necessary, clean the unit with clear water using a soft brush.

Replacing the bulb

• Only use original bulbs from OASE. (→ Technical data)
– The unit may be damaged by the use of spare parts from other manufacturers.
How to proceed:
 G
1. Unscrew the threaded ring.
2. Remove the glass pane and O ring, check for damage and replace if necessary.
3. Remove the defective bulb from the housing.
4. Insert the new bulb.
5. Reassemble the unit in the reverse order.
– Ensure that the O ring is correctly positioned.
6. Reconnect to the power supply and check the function.

Spare parts

The use of original parts from OASE ensures continued
safe and reliable operation of the unit.
Please visit our website for spare parts drawings and spare
parts.
Disposal
N O T E
Do not dispose of this unit with domestic waste.
• Render the unit unusable beforehand by cutting the cables and dispose of the unit via the return system
provided for this purpose.
Cause
Power supply interrupted
Bulb defective
Lamp glass soiled
The brightness of the bulb reduces as the oper-
ating time increases
Seal defective
www.oase-livingwater.com/spareparts
Remedy
Check power supply
Replace bulb
Clean
Replace bulb
Check sealing rings and replace, if necessary
- EN -
11