General Safety Guidelines; Conformity With En 60-601 (§ 6.8.2 B) - AirSep NewLife Intensity Manual Del Usuario

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 33
NewLife
Intensity
®

GENERAL SAFETY GUIDELINES

USE OF OXYGEN
•  Oxygen  is  not  a  flammable  gas,  but  it  accelerates  the  combustion  of  materials.  To  avoid  all  risks  
of  fire,  the  NewLife
sources of heat (cigarettes), as well as any combustible products such as oil, grease, solvents,
aerosols, etc.
• Do not use in an explosive atmosphere.
• Avoid letting oxygen accumulate on an upholstered seat or other fabrics. In the event the
concentrator  is  operating  while  not  supplying  oxygen  to  a  patient,  position  it  so  that  the  gas  flow  is  
diluted in the ambient air.
• Place the device in a ventilated area free from smoke and atmospheric pollution, at least
0.5 meters from any other object.
USE AND MAINTENANCE OF THE DEVICE
• Use the cable provided, and check that the electrical characteristics of the mains socket used
match those indicated on the manufacturer's plate on the rear panel of the machine.
• We recommend avoiding the use of extension cables or even adapters, as they are sources of
sparks  and  therefore  of  fire.
• The NewLife
Intensity must only be used for oxygen therapy and only on medical
®
prescription.  The  indicated  daily  duration  and  flow  must  be  followed,  otherwise  this  may  present  a  
risk to the health of the patient.
•  Do  not  use  in  a  specifically  magnetic  environment  (MRI,  etc.).
This  user's  manual  reflects  the  instruction  and  safety  guidelines  for  the  "user"  of  the  equipment,  
which AirSep acknowledges may be referred to as "patient," "client," or some other related term
throughout various parts of the world.
Only persons who have read and understood this entire manual are
authorised to use the NewLife
alarm intended to warn the user of problems. The maximum distance that the user can move away
from it must, therefore, be determined to suit the surrounding environment, in order that the alarm
may be heard.
Conformity with EN 60-601 (§ 6.8.2 b):
"The manufacturer, assembler, installer or importer are not considered to be responsible
themselves for the consequences on the safety, reliability and characteristics of a device unless:
-­   T he  assembly,  fitting,  extensions,  adjustments,  modifications  or  repairs  have  been  performed  by  
persons authorised by the party in question,
- The electrical installation of the corresponding premises complies with IEC regulations.
AirSep
Corporation
®
Intensity should  be  kept  away  from  all  flames,  incandescent  sources  and  
®
Intensity. The NewLife
®
Intensity has an audible
®
GB
F
1-GB
loading