Taking A Single Measurement - ForaCare D20 No-Coding Manual Del Usuario

Taking a Single Measurement

Always apply the pressure cuff before turning on the monitor.
Step 1
Press . All the LCD symbols will appear. Then the cuff will begin to
inflate automatically.
Step 2
The heart symbol "
pulse is detected during the inflation.
Step 3
After the measurement, the monitor
displays the systolic pressure, diastolic
pressure and pulse rate.
Step 4
Press to switch off. Or it will switch off
automatically after left idle for 3 minutes.
• If you press
• If the pulse rate symbol is shown as "
indicates that the monitor has detected an irregular heart beat.
" will flash when a
during measurement, the monitor will be turned off.
NOTE
" instead of " " , this
33