Assembly And Connection Evaluation; Initial Configuration; Important - Airzone UNO PACK Manual De Instalación

ASSEMBLY AND CONNECTION EVALUATION

Check:
- The thermostat is powered.
- The state of the LEDs of the main control board.
Important: In the Main Control Board, to verify the correct performance,
check D2 and D14 LEDs.
Main control board power
D2
Main control board activity
D14

INITIAL CONFIGURATION

Important: Once the setup has been started, it must conclude. You will be able to modify the desired parameters later.
Language
Select your language. These are the available languages: Spanish, English, French, Italian, German and Portuguese.
Setting wireless device (only available for wireless thermostat)
- Open the radio channel. To do that, press on SW2, the LED D4 will remain solid red. Once open, you have 15 minutes
to make the association. If that period of time expires, start the process over again.
IMPORTANT: not to open more than one radio channel at the same time, it may alter the process.
- Press Airzone to start seeking and then confirm the Wireless association.
- Verify the range is correct (30% minimum) and confirm.
UNO Wireless main control board
Meaning
Solid
Blinking
Airzone Blueface
Red
Green
Airzone Think
Airzone Think
ES
EN
FR
IT
PT
DE
19