System Reset; Zone Reset; Changing Batteries; Assembly And Connection Evaluation - Airzone RADIANT Guía De Instalación Rápida

System reset

If you want to return to factory values, press and hold SW1
for the LEDS to go back to their normal state before starting with the initial configuration process.

Zone reset

If needed, to reset a zone follow the steps shown in the section Advanced Configuration, Zone Parameters for Blueface and Think
thermostats and the section Lite thermostat reset if using Lite thermostats.

Changing batteries

To replace the battery, separate the thermostat from its support and
replace the battery (CR2450).
Important:
We recommend using of top-brand batteries. Using low-quality
batteries may reduce the duration of use
Remember to deposit the old battery into an appropriate recycling point.
Note: Do not forget to remove the security system before taking away the
thermostat from the wall.

ASSEMBLY AND CONNECTION EVALUATION

Check the following aspects:
- The state of the LEDs of the main control board and the rest of control elements. Check the self-diagnose section of
the data sheet of the elements.
- If all the thermostats are powered.
Important: In the main control board, to verify the correct performance, check D3, D11 and D19 LEDs.
until LED D19 stops blinking. Wait
.
D3
D11
D19
Meaning
Main control board activity
Main control board power
Association channel: active
Blinking Green
Solid Red
Solid Red
21
ES
EN
FR
IT
PT
DE