Using A Neckloop - Williams Sound POCKETALKER Pro PKT C1 Manual Y Guia Del Usuario

Using A Neckloop

Williams Sound's optional neckloop telecoil
couplers magnetically couple the audio
output from the POCKETALKER
a hearing aid equipped with a
telephone coil.
The neckloop (NKL 001) works only with
hearing aids equipped with a telephone
coil (T–Switch).
How To Use The Neckloop
1. Place the neckloop over your head
and around your neck.
2. Slide the bead upwards to a
comfortable position. This helps keep
the neckloop in optimal position for
coupling with your hearing aid.
3. Plug the neckloop into the earphone
jack on the POCKETALKER
4. Turn the POCKETALKER
and set the volume control to "3", or
about half of full volume.
16
PRO into
®
PRO.
®
PRO on
®
Using the Neckloop
Slide the bead
upwards to a
comfortable
position.
5. Turn the switch on your hearing aid
to the "T" position and adjust the
volume for comfortable listening.
6. If the sound is weak, increase
the volume on the POCKETALKER
PRO, then on your hearing aid.
Bead
®
17