Volume; Back Panel; Remote Control - THOMSON SB500BT Instrucciones De Funcionamiento

Volume

To increase the volume, press the 'Vol+' button on the top panel. To decrease the volume, press the
'Vol–' button.
Note: Before switching on the machine, please be sure to set the volume to a low level in order to
avoid hearing damage.

Back panel

HDMI IN/OUT
HDMI IN: Connect an external HD video source to the HDMI IN socket. The unit can decode up to 2K
Full HD video and audio signals. Audio will be played from the soundbar.
HDMI OUT: Connect the HDMI OUT socket to a TV or monitor with an HDMI socket. Only video signals
will be sent to the TV or monitor; audio signals will not be sent.
DC power input
Connect the Soundbar to the external power adapter with a 12V/3A DC power supply (included with
product)
External digital/analog audio signal input
OPTICAL input for digital audio input, AUX IN (RCA jack x 2) and LINE IN (3.5mm jack x 1) for analog
audio signal input

Remote control

1. Power On/Off button
2. LINE IN/BT/OPTICAL/HDMI/AUX IN: Select input
mode
3. Rock/Pop: Select Rock or Pop equalizer effects
4. Treble –: Decrease Treble effect
5. BT function: Previous track, Play/Pause, Next track
6. Bass –: Decrease Bass effect
7. Reset: Reset to factory settings (high/low tone/
volume)
8. VOL+: Increase volume
9. Mute: Temporarily mute or unmute. LED lights on the
panel will flash to indicate mute status.
10. Treble +: Increase Treble effect
11. Bass +: Increase Bass effect
12. Jazz/ Movie: Select Jazz or Movie equalizer effects
13. BT Pair: Press and hold the 'BT PAIR' button for
at least 3 seconds to terminate the Bluetooth®
connection and connect another device.
14. VOL–: Decrease volume
15. Battery compartment (on back): Requires 1 x CR2025 battery (included with product)
- EN 4 -