Setting The Seat Surface Length - Kiddy LIFEPRO Instrucciones De Operación

a
Fig. 6
Note that the frame is completely locked in place in the rest
part.
4.2.2 Setting the seat surface length (thigh rest)
Bigger children will have significantly more seating comfort by pulling out the
seat ramp (fig. 7). Under the seat ramp there are three ramp settings in the
seat.
e
Fig. 7
Press down the locking device (a) on the
shoulder support frame (d).
Close the back cover again.
d
1. Tilt the seat ramp (e) approx. 3 – 5 cm
upwards and pull forwards. The seat ramp
can break where there is too much pres-
sure! The seat ramp should not be remo-
ved.
2. Once you have your required seat length,
press ramp (e) into the appropriate snap-on
device. There are three positions possible.
9
ENG