Fitting Into The Vehicle; Choice Of Seat; Settings; Setting The Back Rest And The Shoulder Supports - Kiddy LIFEPRO Instrucciones De Operación

4. Fitting into the vehicle

4.1 Choice of seat

Please read up on using child restraint systems in your vehicle manual or
your authorised repair shop.
The child restraint system can be fitted on any seat in vehicles that have a
3-point belt system.
Position the vehicle seat so that the back rest of the child restraint system is
on that of the vehicle seat.
If the fitting is hindered by a head support, this has to be set accordingly.
The child restraint system kiddy life pro can also be used on car seats facing
backwards with 3-point belt.

4.2 Settings

4.2.1 Setting the back rest and the shoulder supports

The height is ideally set if the head is comfortable in the neck support and
the diagonal belt rests on the middle of the shoulder.
The lowest position of the back rest (1st snap-on on the top) should not be
used with kiddy life pro.
a
Fig. 1
Procedure:
Open the cover on the reverse of the back
rest. Pull the locking device (a) upwards from
the shoulder support frame.
7
ENG