Tabla De Contenido; Meanings Of Signal Words; Important Safety Informations; Intended Use - Flex XC 3401 VRG Instrucciones De Funcionamiento

Polisher XC 3401 VRG
Contents
Meanings of signal words . . . . . . . . . 3
Important safety informations . . . . . . 3
Intended use . . . . . . . . . . . . . . . . . . 3
General Power Tool Safety Warnings 4
SPECIFIC SAFETY RULES
AND SYMBOLS . . . . . . . . . . . . . . . . 6
Overview . . . . . . . . . . . . . . . . . . . . 10
Operating instructions . . . . . . . . . . 11
Maintenance and care . . . . . . . . . . 13
WARRANTY . . . . . . . . . . . . . . . . . . 13
Technical specifications . . . . . . . . . 15

Meanings of signal words

DANGER
DANGER indicates a potentially
hazardous situations which, if ignored,
could result in death or serious injury.
CAUTION
CAUTION indicates a potentially
hazardous situations which, if not
avoided, may result in minor or
moderate injury, or may cause machine
damage.
NOTE
NOTE emphasizes essential
information.
Important safety
informations
Read and understand all of the safety
precautions, warnings and operating
instructions in the Instruction manual
before operating or maintaining this
power tool.
Most accidents that result from power
tool operation and maintenance are
caused by the failure to observe basic
safety rules or precautions.
An accident can often be avoided by
recognizing a potentially hazardous
situation before it occurs, and by
observing appropriate safety
procedures.
Basic safety precautions are outlined in
" "
the SAFETY section of this Instruction
manual and in the sections which
contain the operation and maintenance
instructions.
Hazards that must be avoided to
prevent bodily injury or machine
damage are identified by WARNINGS
on the power tool and in this Instruction
manual.
NEVER use this power tool in a manner
that has not been specifically
recommended by FLEX.

Intended use

This hand-operated orbit polisher is
designed
- is designed for industrial applications,
- for all types of polishing work, e.g.
paintwork on vehicles, furniture, metal
and stone surfaces, etc. with polishing
sponge, lambswool and wool pads,
- for use with polishing tools which are
permitted to run at a speed of at least
500 r.p.m.
3