Testing The M1500Ss Display - 3M MicroTouch M1500SS Guia Del Usuario

3M™ MicroTouch™ Display M1500SS User Guide
Figure 13 Sliding Cable Management Cover Off Base

Testing the M1500SS Display

Note: The M1500SS Display has a power status light located on the front of the bezel.
To test that the display is working properly:
Turn on your computer.
1.
Make sure the video image is displayed. If it is not, turn on your display. Check to
2.
see that the LED on the front bezel is green – orange indicates power but no signal.
Make sure the video image is centered within the screen area. Use the display
3.
controls to adjust the image, if necessary.
Perform an Auto Config first, then if you wish you can adjust the horizontal and vertical
position, contrast, and brightness to better suit your video card and your personal
preference. Refer to Chapter 3 for more information on using the on-screen menu to
adjust the video display.
Power switch
Volume
3M Touch Systems, Inc. Proprietary Information
Microphone in
Head Phones
13