Delivery Scope; Intended Use - Amann Girrbach ceramill matik Modo De Empleo

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 72
I N F O R M A T I O N O N T H E S Y S T E M
4.2

Delivery Scope

_ Milling machine (Ceramill Matik)
E N
_ Coolant/lubricant pumping system with inte-
grated chip-removal system (Ceramill Clean-
stream)
_ Key for manual unlocking of the milling com-
partment
_ Filter fleece for belt filter incl. roller unit
_ Filter cartridge 10" 5μm
_ Analytics instructions
_ KSS test record
_ 3 × 1 l "Coolant/lubricant"
_ pH test-strip set
_ Nitrate test set
_ Refractometer for determination of coolant
content
_ Towel
_ Scanner Voyager, set incl. operating instruc-
tions and USB connection cable
_ Service set, spindle
_ Filter spanner
_ Maintenance unit incl. connection material
_ Torque wrench set, consisting of of holder and
interchangeable blade, size 3
_ Allen key, size 10
_ Allen key, size 2
_ Allen key, size 2.5
_ Allen key, size 5
_ Calipers 0 – 150 mm
_ 2 test blanks for calibration milling
_ Wax blank
_ Cleaning brush (large)
_ Cleaning brush (small)
_ Control line, extraction
_ USB cable 3M
_ Network cable 5M
_ 2 power cables
_ Workpiece holder, 71 mm (clamped in machine)
_ 2 Roto RFID 2.5 ZI (1 × clamped in machine)
_ Roto RFID 1.0 ZI
_ Roto RFID 0.6 ZI
24
_ Roto RFID 0.3 ZI
_ Roto RFID 2.5 PMMA/Wax
_ Roto RFID 1.0 PMMA/Wax
_ Roto RFID 0.6 PMMA/Wax
_ Roto RFID 0.3 PMMA/Wax
_ Glass-tube fuse set
_ Connection set for service technician
4.3

Intended Use

The system is a PC-controlled milling and grinding
machine for the fabrication of dentures by means
of:
_ Dry processing of blanks made of
▪ pre-sintered zirconium oxide
▪ unsintered non-precious metals (NPMs)
▪ Cobalt-chromium alloys
▪ Wax
▪ Plastics
▪ Modelling materials
_ Wet processing of blanks made of
▪ Sintered glass ceramics
▪ Plastics
▪ Hybrid materials
▪ Feldspathic ceramics
Using blanks and tools not approved by the manu-
facturer can damage the machine and make the
product unusable. For such cases, the manufac-
turer shall assume no liability whatsoever. Unau-
thorised modifications/alterations of the machine
shall also void the warranty.
Operation of the system is permitted only with a
suitable extraction system. Consult the manufac-
turer for more information.
Tabla de contenido
loading

Tabla de contenido