NOTE:
Possible machine damage due to insufficient or
incorrect compressed-air supply!
▷ Operate the machine with the required pres-
sure, air volume and air quality (see Technical
Data).
NOTE:
Switch the machine off when not in use or unsu-
pervised for longer periods, e.g., overnight. This
method of saving electrical energy also benefits
the environment.
3
Suitable Personnel
NOTE:
The machine may only be unpacked, installed or
relocated by trained specialist personnel,
authorized by the manufacturer.
NOTE:
The machine may only be put into operation by
trained specialist personnel, authorized by the
manufacturer.
NOTE:
The machine may only be operated by trained
specialised personnel.
S U I T A B L E P E R S O N N E L
4
Information on the Sys-
tem
4.1
General
Ceramill Matik and Ceramill Cleanstream
separately regulated machines with inde-
pendent power supply. However, as they
only function as a unit, a separate descrip-
tion has not been provided for. Both
machines as a unit will be referred to as
the "system".
This User Manual describes various mod-
els of the system. Therefore, the represen-
tations can deviate from the actual
appearance of the machine.
The system is provided factory-calibrated. Prior to
delivery, a test object was factory-milled in order
to check the zero point settings. Possibly remain-
ing milled shavings/chips are not a reason for
rejection.
▷ After unpacking by the authorised shipping
partner: check for possible transport damage. In
case of transport damage, immediately file com-
plaint on site with the freight carrier.
▷ After installation by the authorised service
technician: Check scope of delivery and correct
function. In case of missing parts or incorrect
function, immediately file complaint on site with
the service technician.
E N
23