Epson SureColor S Serie Guia De Instalacion página 22

| Adjusting the Take-in Reel
20
From the front of the printer, pull the adjustment paper taut over the platen, and check the position of
9.
the line you drew in step 7. If the line you drew is not aligned with the white line, go to step 10. If the
lines are aligned, go to step 11.
From the front of the printer, have one person compare the line you drew in step 7 to the white line
10.
on the platen. To make adjustments, have another person at the back of the printer turn the silver
adjustment screw. Turn the screw counterclockwise to move the drawn line back, and turn it
clockwise to move the drawn line forward. The line will move approximately 1 mm with each turn of
the screw. Continue to turn the silver adjustment screw until the drawn line reaches the front of the
white line as shown.
10
11