Zenoah GZ3500T Manual De Usuario página 9

default positions. This design locks the throttle trigger at
idle setting.
A
Chain catcher
The chain catcher is designed to catch the chain if it
snaps or jumps off. This should not happen if the chain
is properly tensioned (see instructions under the
Assembly on page 12 ) and if the bar and chain
heading
are properly serviced and maintained (see instructions
Operation on page 13 ).
under the heading
Vibration damping system
Your product is equipped with a vibration damping
system that is designed to minimize vibration and make
operation easier.
The product's vibration damping system reduces the
transfer of vibration between the engine unit/cutting
equipment and the product's handle unit. The body of
308 - 004 - 27.09.2017
B
the chainsaw, including the cutting equipment, is
insulated from the handles by vibration damping units.
Cutting hardwoods (most broadleaf trees) creates more
vibration than cutting softwoods (most conifers). Cutting
with cutting equipment that is blunt or faulty (wrong type
or badly sharpened) will increase the vibration level.
WARNING: Overexposure to vibration can
lead to circulatory damage or nerve damage
in people who have impaired circulation.
Contact your doctor if you experience
symptoms of overexposure to vibration.
Such symptoms include numbness, loss of
feeling, tingling, pricking, pain, loss of
strength, changes in skin colour or condition.
These symptoms normally appear in the
fingers, hands or wrists. These symptoms
may be increased in cold temperatures.
Start/stop switch
Use the start/stop switch to switch off the engine.
Muffler
The muffler is designed to keep noise levels to a
minimum and to direct exhaust fumes away from the
user.
WARNING: The exhaust fumes from the
engine are hot and may contain sparks
which can start a fire. Never start the
machine indoors or near combustible
material!
In areas with a hot, dry climate there is a high risk of
fires.
9