Volume Punch-Through - Hama 00012306 Instrucciones De Uso

6. Special functions
6.1 Station punch-through
With the station punch-through function, the PROG+ or
PROG- commands can bypass the currently controlled
device and change the stations of a second device. All
other commands are unaffected.
To activate the station punch-through function:
• Press the desired device key (e.g. TV).
• Press and hold the "PROG+" button.
• Press the desired device key (e.g. SAT).
• Release the "PROG+" key again (the LED ashes once
when the setting is activated).
To deactivate the station punch-through function:
• Press the desired device key (e.g. TV).
• Press and hold the "PROG-" button.
• Press the desired device key (e.g. SAT).
• Release the "PROG-" key again (the LED ashes twice
when the setting is deactivated).

6.2 Volume punch-through

With the volume punch-through function, the VOL+ or
VOL- commands can bypass the device currently being
controlled
and adjust the volume of a second device. All other
commands are unaffected.
To activate the volume punch-through function:
• Press the desired device key (e.g. TV).
• Press and hold the "VOL+" button.
• Press the desired device key (e.g. SAT).
• Release the "VOL+" key again (the LED ashes once
when the setting is activated).
To deactivate the station punch-through function:
• Press the desired device key (e.g. TV).
• Press and hold the "VOL-" button.
• Press the desired device key (e.g. SAT).
• Release the "VOL-" key again (the LED ashes twice
when the setting is deactivated).
10
6.3 Macro Power
Macro Power allows you to switch two AV devices on/
off simultaneously.
To activate the Macro Power function:
• Press the desired device key (e.g. TV).
• Press and hold the "POWER" button.
• Press the desired device key (e.g. SAT).
• Release the "POWER" button again (the LED ashes
once when the setting is activated).
To deactivate the Macro Power function:
• Press the desired device key (e.g. TV).
• Press and hold the "POWER" button.
• Press the desired device key (e.g. SAT).
• Release the "POWER" button again (the LED ashes
twice when the setting is deactivated)
7. Maintenance
• Never use old and new batteries in the universal
remote control at the same time, as old batteries tend
to leak and can lead to a loss of performance.
• Never clean the universal remote control with
scouring agents or harsh cleaning agents.
• Keep the universal remote control free of dust by
cleaning it with a dry soft cloth.