Signs And Symbols Used; Scope Of Delivery - Abicor Binzel AUT-WIG 20G Instructivo De Servicio

AUT-WIG

3.4 Signs and symbols used

The following signs and symbols are used in the operating instructions:
Symbol Description
•

1

4 Scope of delivery

• TIG welding torches ABIMIG
For the TIG welding torch ABIMIG
particular torch type and electrode diameter. Suitable equipment kits are available for these equipment
parts. The following items must be ordered separately:
• Equipment kit
Tab. 5 Components
Order data and part numbers for the set-up and wearing parts can be found in the current
ABICOR BINZEL spare and wearing parts lists. The contact for consulting and ordering can
be found in the Internet at www.binzel-abicor.com.
4.1 Transport
The components are carefully checked and packaged, however damage may occur during
shipping.
Goods inspection
In case of complaints
Packaging for return
Tab. 6 Transport
4.2 Storage
Physical storage conditions in a closed environment:
 Tab. 1 Physical conditions on page EN-5
BAL.0166 • 2019-01-03
Bullet symbol for instructions and lists
Cross reference symbol refers to detailed, supplementary or further information
Step(s) described in the text to be carried out in succession
®
ready-to-connect (without equipment) • Operating instructions
®
to function properly, you will need equipment parts tuned to the
Use the delivery note to check that everything has been delivered.
Check the delivery for damage (visual inspection).
If the delivery has been damaged during transportation, contact the last
carrier immediately. Retain the packaging for potential inspection by the
carrier.
Where possible, use the original packaging and the original packaging
material. If you have any questions about the packaging and/or how to
secure an item during shipment, please consult your supplier.
4 Scope of delivery
• Tungsten electrode
EN - 7